Sunshine Make ISI Welding Hose

Product Description Rubber Welding Hose
sunshine make ISI welding hose oxy/ acc Specifications: 1) 1/4\" x 100m 2) 5/16\" x 100m 3) 3/8\" x 100m 4) 1/2\" x 50m Inner packing: 1 roll with clear plastic film & gunny beg

DC Welding Machine

GENERAL
Max. Ambient Temp. to which Rating Apply	40 C	40 C	40 C	40 C
Class of Cooling	H	H	H	H
Type of Cooling	Forced Air Cooled	Forced Air Cooled	Forced Air Cooled	Forced Air Cooled
Approx. Dimensions (LxWxH) mm	658 x 762 x 508	711 x 762 x 546	711 x 762 x 546	736 x 762 x 596
Approx. Weight Kg.	200	220	240	265

AC/DC Welding Machine

Features:-

Suitable for both S.S and Aluminium Tig Welding.

A better & Quicker job with less spatter.

Good are stricking properties with higher efficiency.

Continious amperage adjustment (mechnical).

Forced Draft Fan Cooling (In case Air Cooled).

Protective Secondry & Primary Terminal under hinged door.

Compact in size and light in weight.

Mounted on Wheel.

Minimum maintenance.

Power saving.

 

Forced Air Cooled>>

TECHNICAL SPECIFICATION COVERING IS -1851
	Model Multipurpose		AXB-400
1.	Welding Current range	AMPS.	10-400
2.	Max. Cont. current at 60% Duty Cycle	AMPS.	400
3.	Max. Cont. current at 100% Duty Cycle	AMPS.	240
4.	Open Circuit Voltage	VOLTS	70
5.	KVA Rating at 60% Duty Cycle	KVA	26
6.	Input Supply	VOLTS	2 lines of 3 Phase
7.	Frequency	HZ	50HZ
8.	Cooling	TYPE	Forced Air Cooled
9.	Insulation	CLASS	H
10.	Type of output Current Regulation	MODE	STEPLESS REGULATION

MIG / TIG Welding Wire for Aluminium & SS

 

-- MIG

Steel

MIG welding wire in carbon steel (sizes 0.8mm, 1.0mm, 1.2mm, 1.6mm)

Stainless Steels

MIG Welding Stainless steel wire in 304L, 309L, 309L, 310, 347 in different sizes from 0.8mm, 1mm, 1.2mm, 1.6mm & as per customer's specifications.

Aluminium

Superior Quality weldtech make MIG welding fillers on plastic / wooden spools in different grades, as pure 5% silicon & high silicon based. Sizes 0.8, 1.0mm, 1.2mm, 1.6mm, 2.0mm & as per customer requirements.

MIG / TIG Welding Wire for Aluminium & SS

 

-- TIG

Filler Wires

Stainless Steel in 304, 304L, 316, 316L, 309, 309L, 310, 347 etc. from size 1.6 mm 2.0 mm, 2.4 mm, 3.0 mm, 3.15 mm.

Steel

Carbon Steel / Alloy Steel Sizes 1.6 mm, 2.0 mm, 2.4 mm, 3.15 mm

Aluminium

Pure, Silicone based 5%, Hi Silicon, 5% Mg, in all sizes from 1.6 mm, 2.0 mm 2.4 mm, 3.15 mm, 4.0 mm, 5.0 mm, 6.0 mm. Tungsten Electrodes 2% Thoriated or Zirconated range 1.6 mm, 2.0 mm, 3.0 mm, 4.0 mm, 5.0 mm, 6.0 mm, 8.0 mm, 10.0 mm, 12 mm.

Tungsten Rod

Sizes are available 1.6 mm to 8 mm

TIG Torch Gas cooled/Water cooled

TIG Torch Gas cooled/Water cooled

Electrode Drying Oven

Armac Bench Type
The electrode drying oven is designed to meet the standard requirement of arc welding electrode and is ideal for re-drying large quantity of electrodes
Technical Specification

Model	A.E - 1
INPUT SUPPLY	230V AC, 50 Hz
INPUT CURRENT RANGE	8.5 Amp
INPUT POWER	1800 watts
TEMPERATURE RANGE	50°C-250°C
TYPE OF CONTROL	THERMOSTATE
PHASES	SINGLE
NO. OF TRAYS	3
STORAGE SPACE	25 kg (app.)

Digital Lux Meter

Digital Lux Meter

RANGE	0 to 50000 Lux in 3 ranges of 0 to 2000, 0 to 20000 and 0 to 50000 Lux. Range selection is provided with front panel control.
ACCURACY	± 5% ± 2 least counts.
RESOLUTION	1 in the range of 0 to 2000 Lux. 10 in the range of 0 to 20000 Lux. 100 in the range of 0 to 50000 Lux.
DATA HOLD	Data hold facility is provided.
DISPLAY	3½ Digit, 7 segment LCD type of 12.5mm height. X10, X100, data hold and low battery indications are provided
SENSOR	Separately attached light sensor allows user to take measurements at an optimum position.
POWER REQUIREMENTS	9 volts battery.
SIZE & WEIGHT	23 mm (H) X 73 mm (W) X 108 mm (L). 160 gms
STANDARD ACCESSORIES	Battery, instruction manual and carrying case.

Digital Sound Level Meter

Digital Sound Level Meter

Features:

• LCD digital display
• Wide dynamic range
• Auto/Manual range
• Fast/Slow response selectable
• MAX value hold function
• A/C weighting selection
• AC/DC auxilitary output
• Backlight
• Low power indication

Specification:

• Measurement range: 30dB ~ 130dB
• Accuracy: ±2dB
• Resolution: 0.1dB
• Display: 3 1/2 digitals
• Sample rate: 2 times/s
• Battery voltage: 4X1.5VAA

Single Stage Regulator

In a single stage regulator, the high pressure of the gas in the cylinder is reduced to the required working pressure by an adjusting screw. It is provided with 2 pressure gauges as well as with only one pressure gauge to show the inlet pressure.

Features:

Suitable for all industrial; purposes i.e welding,cutting,heating,brazing. Constant gas flow Accurate pressure setting No gas leakage Safe & Secure Die forged Brass Body Safety relief valve provided

Available for :- O2 , Acetylene, Argon, Nitrozen, Hydrozen, Co2

Lpg regulator with meter

High pressure regulator Lpg

Manual Cutting blow pipe

Manual cutting blow pipe is a well balanced band type capable of cutting mild steel upto a thickness of 300 mm. It can be used either with dissolved Acetylene or with low pressure generated Acetylene with a suitable nozzle. It can be used with L.P.G. gas also. Its body is forged with brass, ensuring total safety. Backfire are almost completely eliminated with a specially designed injector. The joints are silver soldered. Supplied with 3/64" nozzle for cutting upto 50mm M.S. and 1/16" for cutting upto 100mm M.S.

Cutting Nozzle

Cutting Nozzle A type- Suitable for DA Gas

Sizes available 1/16, 3/64, 1/32, 5/64, 7/64, 1/8, 3/32.

5/12 - Also available in 12 holes.

Trolley

A typical design Trolley capable for carrying oxygen and acetylene gas cylinders, fitted with a tool box for carrying normal accessories like welding or, cutting torches, pressure regulators, gas hose pipes and other required tools etc.

The trolley shall be stable when stationary with the cylinders in vertical position.

Construction of the trolley is too robust having load carrying capacity more than 2KN load. It is most essential for work-shop for welder's.

Fully Insulated Electrode Holders

Electrode Holders are suitable for adverse welding conditions like shipbuilding, construction, fabrication, docyard or welding in enclosed conditions like vessels etc. They are designed for safe and comfortable welding. They are provided easy and effective connection of cable to holder. Their jaws are made from Nonferrous Metallic alloy which transmit 100% current to the electrode.
model no. MN - 02
Base Body : Brass / Copper
Outer Body : Heat Proof Insulation

Features :

For High Conductivity of Current (Copper/Brass) Body.

Heat Resistant Insulators For Longer Life.

Heavy Duty Manual Arc Welding.

Current Rating Up to 600 Amps.

Suitable For Electrode Dia Up to 5 mm.

Open Mouth Jaw Type.

For Better Cable Connection 2 Allen Screws Provided with Grip Plate in Fully Insulated.

For Better Cable Connection 3 Bolts are Provided with Grip Plate in Semi-Insulated.

 

Semi Insulated Electrode Holder

Electrode Holders are suitable for adverse welding conditions like shipbuilding, construction, fabrication, docyard or welding in enclosed conditions like vessels etc. They are designed for safe and comfortable welding. They are provided easy and effective connection of cable to holder. Their jaws are made from Nonferrous Metallic alloy which transmit 100% current to the electrode.

MODEL : MN - 05
Base Body : Steel
Copper Jaw with 0/2 Copper Strips

Features :

For High Conductivity of Current (Copper/Brass) Body.

Heat Resistant Insulators For Longer Life.

Heavy Duty Manual Arc Welding.

Current Rating Up to 600 Amps.

Suitable For Electrode Dia Up to 5 mm.

Open Mouth Jaw Type.

For Better Cable Connection 2 Allen Screws Provided with Grip Plate in Fully Insulated.

For Better Cable Connection 3 Bolts are Provided with Grip Plate in Semi-Insulated.

Semi Insulated Electrode Holders

Electrode Holders are suitable for adverse welding conditions like shipbuilding, construction, fabrication, docyard or welding in enclosed conditions like vessels etc. They are designed for safe and comfortable welding. They are provided easy and effective connection of cable to holder. Their jaws are made from Nonferrous Metallic alloy which transmit 100% current to the electrode.
MODEL  :  MN - 06
Base Body : Steel
Copper Jaw with 4 Copper Strips
FEATURES :-

• For High Conductivity of Current (Copper/Brass) Body.
  
• Heat Resistant Insulators For Longer Life.
  
• Heavy Duty Manual Arc Welding.
  
• Current Rating Up to 600 Amps.
  
• Suitable For Electrode Dia Up to 5 mm.
  
• Open Mouth Jaw Type.
  
• For Better Cable Connection 2 Allen Screws Provided with Grip Plate in Fully Insulated.
  
• For Better Cable Connection 3 Bolts are Provided with Grip Plate in Semi-Insulated.

Semi Insulated Electrode Holder

Electrode Holders are suitable for adverse welding conditions like shipbuilding, construction, fabrication, docyard or welding in enclosed conditions like vessels etc. They are designed for safe and comfortable welding. They are provided easy and effective connection of cable to holder. Their jaws are made from Nonferrous Metallic alloy which transmit 100% current to the electrode.
MODEL : MN - 07
Base Body : Steel (Heavy duty)
Copper Jaw with 4 Copper Strips
FEATURES

• For High Conductivity of Current (Copper/Brass) Body.
  
• Heat Resistant Insulators For Longer Life.
  
• Heavy Duty Manual Arc Welding.
  
• Current Rating Up to 600 Amps.
  
• Suitable For Electrode Dia Up to 5 mm.
  
• Open Mouth Jaw Type.
  
• For Better Cable Connection 2 Allen Screws Provided with Grip Plate in Fully Insulated.
  
• For Better Cable Connection 3 Bolts are Provided with Grip Plate in Semi-Insulated.

Semi Insulated Electrode Holders

Electrode Holders are suitable for adverse welding conditions like shipbuilding, construction, fabrication, docyard or welding in enclosed conditions like vessels etc. They are designed for safe and comfortable welding. They are provided easy and effective connection of cable to holder. Their jaws are made from Nonferrous Metallic alloy which transmit 100% current to the electrode.
MN - 8
Base Body : Steel
Copper Jaw with 5 Copper Strips

Features :

• For High Conductivity of Current (Copper/Brass) Body.
  
• Heat Resistant Insulators For Longer Life.
  
• Heavy Duty Manual Arc Welding.
  
• Current Rating Up to 600 Amps.
  
• Suitable For Electrode Dia Up to 5 mm.
  
• Open Mouth Jaw Type.
  
• For Better Cable Connection 2 Allen Screws Provided with Grip Plate in Fully Insulated.
  
• For Better Cable Connection 3 Bolts are Provided with Grip Plate in Semi-Insulated.

Semi Insulated Electrode Holders

Electrode Holders are suitable for adverse welding conditions like shipbuilding, construction, fabrication, docyard or welding in enclosed conditions like vessels etc. They are designed for safe and comfortable welding. They are provided easy and effective connection of cable to holder. Their jaws are made from

Nonferrous Metallic alloy which transmit 100% current to the electrode.